QATM QCUT 800 A
The Qcut 800 A industrial wet cutting machine meets the highest demands on space and cutting capabilities with its innovative design, construction and operation concept.
QATM QCUT 800 A
The Qcut 800 A industrial wet cutting machine meets the highest demands on space and cutting capabilities with its innovative design, construction and operation concept.
A water-cooled 30 kW main motor is integrated in the swing arm and the automatic horizontal table (X-axis) and cutting wheel movement (Y-axis) can reach up to 100 mm/sec. With a completely new approach of the automatic cross-feed movement (Z-axis) through the swing arm, the cutting chamber is ideally usable. Parallel adjustment of the wheel guard during vertical cutting sequences significantly increases the cutting capacity.
The large front and hinged door with safety lock allows access to the machine table with longitudinal and transverse T-slots. The side door allows an easy and convenient change of the cutting wheel if the Z-axis is set hard right. Recirculating cooling and automatic central lubrication systems are integrated into the machine’s robust welded steel structural body.
PRODUCT BENEFITS
- Automatic horizontal movement (X-axis) and vertical movement (Y-axis) up to 100 mm/sec through highly dynamic shaft drives in fast travel
- Automatic cross-feeding of cutting wheels (Z-axis)
- Multi-item process MPP
- Increased cutting capacity through parallel adjustment of wheel guards in vertical cutting
- Large machine table with T-nuts lengthwise and crosswise
- Sliding and side door with security lock
- Touch screen with control of QATM software
- Storage of unlimited programs with password; update and backup via USB
- Remote service/support is available via controls (ISDN connection with on-site router required)
- Smartphone optics for easy compilation of compact program sequences with positional steps and Drag&Drop cutting modes (travel, cut, diagonal, layer and segment cuts)
- The combination of an arbitrary selection of cutting positions allows serial cuts of different cutting sequences
- Automatic cutting with pulse cutting
- Cutting force related feed control and soft setting control
- Varying speed
- Manual control of all axes with joystick
- Water-cooled 30 kW main engine integrated in the swing arm
- Incl. cutting wheel shaft with wear ring and chamber lighting
- Automatic centralized lubrication (6 bar compressed air required)
- Wide range of different clamping tools and systems available
- Stationary surveillance
- Solid welded steel casing construction, powder coated
A water-cooled 30 kW main motor is integrated in the swing arm and the automatic horizontal table (X-axis) and cutting wheel movement (Y-axis) can reach up to 100 mm/sec. With a completely new approach of the automatic cross-feed movement (Z-axis) through the swing arm, the cutting chamber is ideally usable. Parallel adjustment of the wheel guard during vertical cutting sequences significantly increases the cutting capacity.
The large front and hinged door with safety lock allows access to the machine table with longitudinal and transverse T-slots. The side door allows an easy and convenient change of the cutting wheel if the Z-axis is set hard right. Recirculating cooling and automatic central lubrication systems are integrated into the machine’s robust welded steel structural body.
PRODUCT BENEFITS
- Automatic horizontal movement (X-axis) and vertical movement (Y-axis) up to 100 mm/sec through highly dynamic shaft drives in fast travel
- Automatic cross-feeding of cutting wheels (Z-axis)
- Multi-item process MPP
- Increased cutting capacity through parallel adjustment of wheel guards in vertical cutting
- Large machine table with T-nuts lengthwise and crosswise
- Sliding and side door with security lock
- Touch screen with control of QATM software
- Storage of unlimited programs with password; update and backup via USB
- Remote service/support is available via controls (ISDN connection with on-site router required)
- Smartphone optics for easy compilation of compact program sequences with positional steps and Drag&Drop cutting modes (travel, cut, diagonal, layer and segment cuts)
- The combination of an arbitrary selection of cutting positions allows serial cuts of different cutting sequences
- Automatic cutting with pulse cutting
- Cutting force related feed control and soft setting control
- Varying speed
- Manual control of all axes with joystick
- Water-cooled 30 kW main engine integrated in the swing arm
- Incl. cutting wheel shaft with wear ring and chamber lighting
- Automatic centralized lubrication (6 bar compressed air required)
- Wide range of different clamping tools and systems available
- Stationary surveillance
- Solid welded steel casing construction, powder coated
Need help choosing the right product?
Our product specialists can help you choose the right instrument for your business.
